After you get the cables hooked up and have selected the right input than you should be all set. Same thing if you have the composite cable. Is this a feature on the new version I want to see the output on the TV. I tried the HDMI cable on my PS3 and it's working fine. It was still working for 20 minutes then it just suddenly lost signal. So, if you're Wii is hooked up via a component input, than you're gonna have to find that exact input in order to see the picture. I just updated the version of my Wii U and then patched the resident evil game. >AFTER you've set up the cables, make sure you're inputs on you're TV can be accessed from the input menu. I myself have a TX-SR508 which is basically the same thing as yours only with optional 7.1 setup (that I don't even use). You will need a separate yellow composite cable running out of the receiver and into the TV's composite input. We're going to have such a good time.įrom the sounds of it, I think you're gonna have to try one of two things:ĬOMPONENT CABLES (2 red/white audio cables PLUS the 3 GREEN, BLUE, AND ORANGE video cables): You will need separate component video cables running out from the receiver and into the TV's component input.ĬOMPOSITE CABLE (2 red/white audio cable and the 1 YELLOW video cable): Maybe we'll watch a game, have a few brews, you know. So give me your name and number and I will come over and help you. I'm sure it does and I'm sure you know it does, but I just thought I'd say it all the same.Īside from those obvious problems, I'd sort of have to be looking at what you've got in your home. Make sure your TV supports the resolution. Make sure you've got an analog connection (component, most likely) going from your receiver to your TV because you can't go from your Wii using an analog signal to your TV using a digital signal (like HDMI). I sometimes get confused when my console is hooked up to component 2 on the receiver and the receiver is hooked to component 1 on the TV. Make sure your TV and your receiver are set to the correct source. Sometimes when its slightly dark I get the green and blue plugs mixed up. Is there anyway to test the ports on the receiver or maybe a way to put a mutlimeter on the receiver and see what kind of voltage it is outputting.Well I don't mean to insult your intelligence in any way, but before any other kind of troubleshooting: There is only a 15 amp breaker powering the entire room, this is a rental so nothing I am willing to do about it. I am thinking either the receiver is starting to go out or the power issues in the room are getting worse due to to much load. The Wii has video output when connected directly to the tv. I tried known working cables for the following with no positive results:ĭifferent HDMI cable, different Video cable. I have a Yamaha V463 receiver with an HDMI cable to the TV for video, a Fiber Optic cable to the tv for sound since the receiver does not do audio over HDMI, I also have a single video cable running from the back of the receiver in the monitor out port to the back of the tv to the video in. This afternoon when I hooked up the Wii I got no video only sound from the Wii.Īfter following some directions I found online of how to fix this, unplug the Wii from the receiver and plug directly into tv then plug back into receiver, this fixed the issue.įastfoward to later this evening and I have the same problem again, but this time no matter what I changed out it refuses to give me video only audio again. After having my Wii hooked up to a different TV for a few months I decided to hook it up to my TV on the top floor with surround sound and what not.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |